Equalization
Listado equalization
-
5 inch reel equalization: nab or iec tape speeds: ips wow and flutter: ips) frequency response: 40hz to 22khz (15 ips) signal to noise ratio: 68db total harmonic distortion: 03v (line) dimensions: 410 x 461 x 256mm weight: 20kg no tiene control remoto y hay que cambiarle el pinch rollerdetalle: track system: 2-track, 2-channel, stereo system heads: 2 x record/playback, 1 x erase motor: 2 x reel, 1 x capstan reel size: up to 108% crosstalk: 50db input: 300mv (line), 1mv (mic) output: 0vendo grabador profesional cinta abierta tascam 32 original japĂłn muy cuidado y conservadose retira por la zona de berazategui, no se realizan envĂos
-
7% thd, for europe) 160 w + 160 w high dynamic power/channel ( ohms) w damping factor 250 frequency response 5 hz-100 khz (+0 db/-3 db) riaa equalization deviation 20 hz-20 khz +/-0), 150 w Ă— 2 (rms) • diseño simĂ©trico para una reproducciĂłn estĂ©reo ideal • transmisiĂłn de señal equilibrada de fase completa • amplificador de potencia flotante y equilibrado con mosfet • diseño de baja impedancia exhaustivo (fijaciĂłn segura mediante tornillos/cables gruesos) • transformador ei personalizado instalado con arandelas de latĂłn • terminales de entrada xlr equilibrados • amplificaciĂłn fonográfica con configuraciĂłn independiente • dimensiones (ancho Ă— alto Ă— largo): mm • peso: 23,4 kg *especificaciones tĂ©cnicasyamaha a-s amplificador estereo integrado 2x160wt, 220v, importador directo caracterĂsticas amplificador integrado • alta potencia de salida de 160 w Ă— 2 (máxreceiver / integrated amplifier maximum power (4 ohms, 1khz, 05 db total harmonic distortion (cd to sp out, 20 hz-20 khz) %
-
4a maximum charging current limit equalization and 14technical specifications cells per unit 6 voltage per unit 12 capacity 34w @ 15-minute rate to 1for higher temperatures the time interval will be shorter67v per cell @ 77°f (25°c) weight approximately 556 kg) maximum 130a (5 sec) discharge current internal approximately 17 mo resistance operating discharge: 5°f~122°f (-15°c~50°c) temperature charge: 5°f~104°f (-15°c~40°c) range storage: 5°f~104°f (-15°c~40°c) nominal 77°f ± 5°f (25°c ± 3°c) operating temperature range float charging 138 vdc/unit voltage average at 77°f (25°c) recommended 30 vdc/unit cycle service average at 77°f (25°c) self discharge batteries can be stored for six months at 77°f (25°c)please charge batteries before usingvoltage test prior to battery installation is recommendedterminal f2- faston tab 250 container abs ul94-hb/file e material flammability resistance of ul94-v0/file e is
-
Two-band equalization•balanced loop-through/mix output“daisychain” additional eon speakers or send the mixed output to a mixing console•rugged, light-weight, black co-polymer enclosureused jbl eon g2 15 speakers muy buen estado con su funda jbl estoy en palermo hago envios a todo el pais acepto mercado pago muy buen sonido y calidad de materiales usa jbl eon15 g2 feature: •the second generation of one of the most successful and influential professional speaker systems everone balanced mic/line input, two•multi-angle enclosure for front of house or stage monitor application•built in 3-input mixer•integral 35 mm pole mount receptacleair movement in the finned ports dissipates heat – no internal or external cooling fans are required•1 in (throat diameter) jbl compression driver with 1•60° x 90°(nominal) constant directivity horn•thermomaster® total thermal management system®•extended low-frequency performance delivers powerful bass down to 39 hz75 in titanium diaphragm and ferro-fluid coolinga single piece, cast-aluminum baffle integrates the woofer frame,horn, in mic position) and amplifier heat sink•300 w low-frequency and 100 w high-frequency (bi-amplified) – actual power delivered to the drivers25 in phone line-level inputs•tailored dynamic processing protects amplifiers and speakers from being over-driven without producing extreme changes in frequency response as level varies•15 in differential drive® low-frequency driver with dual neodymium magnet for light weight and reduced distortionrecommended pro sound use: live sound reinforcement, speech, vocals, and music playback in entertainment, a/v, and institutional venues – especially when ease of use, audio quality and portability are important factors
-
7% thd, for europe) 160 w + 160 w high dynamic power/channel ( ohms) w damping factor 250 frequency response 5 hz-100 khz (+0 db/-3 db) riaa equalization deviation 20 hz-20 khz +/-0), 150 w Ă— 2 (rms) • diseño simĂ©trico para una reproducciĂłn estĂ©reo ideal • transmisiĂłn de señal equilibrada de fase completa • amplificador de potencia flotante y equilibrado con mosfet • diseño de baja impedancia exhaustivo (fijaciĂłn segura mediante tornillos/cables gruesos) • transformador ei personalizado instalado con arandelas de latĂłn • terminales de entrada xlr equilibrados • amplificaciĂłn fonográfica con configuraciĂłn independiente • dimensiones (ancho Ă— alto Ă— largo): mm • peso: 23,4 kg *especificaciones tĂ©cnicassonido paul yamaha a-s amplificador estereo integrado 2x160wt, 220v, importador directo 1 unidad en stock open box ussreceiver / integrated amplifier maximum power (4 ohms, 1khz, 05 db total harmonic distortion (cd to sp out, 20 hz-20 khz) %caracterĂsticas amplificador integrado • alta potencia de salida de 160 w Ă— 2 (máx
-
High cut filter: -3db at 8khz, 12db/octthe proeminent feature, the eq, uses broad slopes for its two extreme points (50hz and 8khz) to tailor the sound rather than correct it; active circuitry is usedoutput amplifier output amplifier audio output: up to 14v rms into ohm or greater frequency response: below 5hz to beyond 125khz (±0,5db) below 3hz to beyond 270khz (-3db) square wave rise time: square wave tilt: less than 5% at 20hz thd: less than at 2v rms output imd: less than % at equivalent 2v rms output outputs: 2x headphones, 2x rec-out, 2x pre-out, 2x speaker pairs output impedance: less than 100 ohm load impedance: ohm or greater s/n ratio: 92db below 2v rms inputs: 3x aux, 2x tape, 2x phono, 1x tuner, 1x power amp feed-through input sensitivity: 200mv for 2v rms output input impedance: 20kohm subsonic filter: -3db at 20hz, 12db/octfuncionado perfectamente con service hecho hace un mes con garantĂadimensions: 40,6 x 12 x 30,5cm weight: 9kgentradas para fono, aux, casetera, sintonizadorlast preamplifier before the sale to beatrice food and subsequent departure of the us-built harman/kardoneven if discreetely, at least more so than pioneer or marantz, harman kardon was tops and chose to show its art not with more buttons, functions or displays but by remainig true to its name: citationespecificaciones tĂ©cnicas y descripciĂłn tomadas de thevintageknobse puede probarvolume control tracking: ±0,5db, 0db to -60db attenuation turn-on delay: 5 to 8 seconds phono preamplifier phono preamplifier equalization: riaa (± 0,25db) thd: imd: s/n ratio: > 80db below 10mv input reference at 1khz input sensitivity: 2,8mv for 2v output, 1khz input impedance: 47kohm, ±5%, 80pf overload: > 18mv at 20hz > 180mv at 1khz > 1,8v at 20khz general general pc: 21w maxreaction to square waves is exemplary and the phono stage is difficult to overloadthe volume pot is a 32-step / fixed-resistors attenuator while the headphones is fed by the connected power amp's loop through, allowing direct speaker selection from the seventeen as welloportunidad, preamplificador de la Ă©poca de oro de harman kardon hecho en usa
$ 13000
-
Voltage 10 vpp controls gain: -60 db to +23 db range master volume line out level ground lift (switch on rear panel) pre/post eq (switch on rear panel) equalization low: center frequency: 40 hz; level: ±16 db low mid: center frequency: 360 hz, level: ±16 db high mid: center frequency: 800 hz, level: ±16 db high: center frequency: 10 khz, level: ±16 db vpf (variable pre-shape filter) center frequency 380 hz vle (vintage loudspeaker emulator) frequency range 250 hz-20 khz outputs line out: balanced xlr, maxvoltage 20 vpp effect send: unbalanced, max/ 25 cm height: 3voltage 25 vpp effect return: impedance 33 kohm, maxvoltage 2 vpp speaker out: speakon/1/4" combo, 1/4" weight: 5voltage 20 vpp (pre-eq) tuner out: unbalanced, maxinputs input: impedance 500 kohm, max3 cm output power: 250w rms @ 4 ohms / 150w rms @ 8 ohm power requirement: v requiere transformador volts de 50 watvoltage 15 vpp balanced input (xlr): impedance 100 kohm, max
$ 18000