Ohms frequency response
Listado ohms frequency response
-
5 oz (100 g) phones out power rating: 130 mw + 130 mw at 32 ohms frequency response: 20 hz–20 khz (+/- 00 v at 10 kohms frequency response: 20 hz–20 khz (+/- 00 + aptx headphone impedance: ohms recommended gain control: 3 gain stages: high, mid, low continuous playback: 12 hrs (screen off) standby: 200 hrs charging time: approx5vp-p at 75 ohms rated output impedance: 75 ohms usb dac dsd: up to dsd128 (native or dop), native dsd decode at dop mode pcm: up to 192 khz/24 bit windows: supported (cayin usb audio driver required) mac os x: supported (driver not required) android: not supported ios: not supported usb mode: asynchronized usb audio 2modern and minimalist in style, this dap has an aluminum chassis, an anti-slip leatherette backing, a 2*tambiĂ©n permite usar como dac directo para la pc o inclusive para tablet o celular*suena excelente este equipo de gran calidad de sonido con varias opciones, producto noble de gran calidadit features the akm dac chipset, an audiophile favorite, with support for all common music formats up to 32 bit/384 khz and native dsd decoding up to 11vendo tremendo reproductor + auricular *cayin n3 dap, master calidad reproductortenga seguridad antes de ofertarit can output pcm and dop to an external dac via the dual digital output, and can function as a usb dac when connected to a computer0 with apt-x: lossless and wireless¿¿ enables lossless music transmission over a wireless connection, apt-x is superior with wider bandwidth, shorter delay, better error correction and most important hi-fidelity audio reproduction around the world roughly 2 billion devices are powered by apt-x audio, covering automobile, home and portable applications dsd not supported by bluetooth transmission duplex bluetooth service become a wireless dac/amp when connect to bluetooth source(such as mobile phone) support ctia standard headphones support regular playback on non-cita headphone uncompromised digital capability native decode dsd 256 pcm upto 32bit/384khz, direct handling of sacd-iso specs cayin construction: aluminum chassis and anti-slip leatherette backing dac chipset: aken headphone opamp: opa line amp: opa audio file formats: dsf, diff, sacd-iso, wav, aiff, flac, alac, ape, wma, mp3, ogg display: 22 db, fs=192 khz); 5 hz–50 khz (+/- 2 db, fs=192 khz) thd+n: khz, fs=44se retira por cap fed*se probo nada mas para testear unos auris y recomendar luego este equipo1 khz; 20 hz–20 khz, a-weighted) dynamic range: 108 db (20 hz–20 khz, a-weighted) snr: 108 db (20 hz–20 khz, a-weighted) coaxial out rated output level: 0debe comunicarse luego de ofertar y la operaciĂłn se debe realizar dentro de los 3 dias de ofertado caso contrario califico negativo y vuelvo a publicar sin excepcion!!!4-inch screen, and capacitive buttons that give feedback when touched0 with apt-x: lossless and wireless¿¿and with up to 12 hours of continuous playback (and 200 hours of standby), you can keep the music going all day long*no incluye tarjeta de memoriahaga todas las preguntas correspondiente0 and aptx allows for convenient connection to the latest wireless headphones and speakers*ejemplo de prueba bluetooth con el celular, y se escucha spotify, reproductor de audio o peliculas o bien youtube, todo sin cable con sonido excelente*tiene dĂas en el paĂs, *se va sin caja, solo reproductor, cable usb original de gran calidad y la funda*competidor directo de fiio x3 segunda generaciĂłn*con este combo se va estos flor de auriculares kz-zs1-in-ear-hifi-dual-dynamic-unit-heavy-bass- suena de la ostias, hifi dual dynamic, viene asĂ como esta sin detalles, sin caja solo el auricular y su gomita instalada, tema caja los deje `por tema aduana1 khz; 20 hz–20 khz, a-weighted) dynamic range: 108 db (20 hz–20 khz, a-weighted) snr: 108 db (20 hz–20 khz, a-weighted) output impedance: = 1 ohm line out output level: 1haciendo de dac amplificador el equipoplus, its built-in bluetooth 44 in (6 cm) tft 400x360 ips screen buttons: capacitive touch bluetooth version: bluetooth 4ofertar es un compromiso de compra ineludible*a su vez se puede reproducir por usb otg5–2a charger, not included) external storage: tf (up to 256 gb), usb otg output connectors: 33 db, fs=192 khz); 5 hz–50 khz (+/- 2 db, fs=192 khz) thd+n: khz, fs=440 class dual digital outputs from one type-c connector integrating s/pfif and usb audio output into usb type-c port an ideal portable5mm headphone and usb type-c s/pdif output: dop and d2p dop output: dsd up to dsd64, pcm up to 24 bit/192 khz dimensions (l x w x h): 3si ven review van a ver equipo super completocayin’s lightest digital audio player to date, the n3 has gotten a ton of hype since its unveiling at canjam*tiene varias opciones como bluetooth 4
-
Jbl gtw peak 4 ohms big bass with polypropylene woofer cone outstanding audio output, low distortion exceptional venting for increased power handling enclosure up to jbl professional standards accurate frequency response specifications: sensitivity (283v@1m) 96db peak power w nominal impedance 4 ohms power handling (rms) 300w power handling (peak) w frequency response 20hz – 400hz dimensions: mounting depth (mm) 185 mounting cutout diameter (mm) 355 external diameter (mm) 391 mounting depth (in) mounting cutout diameter (in) 14 external diameter (in) woofer specifications: suspension compliance (cms – ?m/n) 102 voice inductance 1khz (levc – mh) 242 driver radiating area (sd – in2/cm electrical q (qes) 03 maximum excursion (xmax –in/mm)31/8 motor force factor (bl – tm)total q (qts) 07 voice coil height (hvc – in/mm) compliance volume (vas – ft3 / l) voice coil dc resistance (revc – ohms) 376 free-air resonance (fs – hz) 2763 magnetic gap height (hag – in/mm)67 mechanical q (qms) 5
$ 4990
-
Power handling is 300 watts at 8 ohms with an expanded frequency response of 30hz-2xls produce a smooth response along with the clear, punchy attack that changed the sound of bassthis tuned, duct-vented xl cabinet and 15-inch low-bass driver add more bottom to your soundeach cabinet is built tough with a shockproof metal grill, reinforced corners, recessed carry handles and a rugged covering5khzsensitivity: 98db at 1w/1mvoice coil: 3 inchesmagnet weight: 100ozparallel 1/4-inch inputsdimensions: 24hartke 115xl professionals choose the xl series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone driversspecially tuned, duct-vented cabinet designprecisionhartkexl 15-inch aluminum-cone bass driverpower handling: 300 watts at 8 ohmsfrequency response: 30hz-2
-
Especificaciones: valvulas: el84 2pcs, 12ax7b 1pc power output: 10w+10w @ 4 ohms frequency response: khz (+-1db) input sensitivity: 500mv signal-to-noise ratio: -80db / 35w residual noise input ac voltage: vac power consumption: 38w input impedance: 50k ohms output impedance: 8/6/4 ohms (japan z11-ei output transformers) dimensions: 130mm (w) x 130mm (d) x 130mm (h) weight: 2el amplificador estĂ©reo valvulartubecube | 7 ofrece un gran sonidoesta máquina 100% valvular cuenta con una potencia de salida de 10 w + 10 w a 4 ohmios que es perfecto para un amplificador de audio de sala con altavoces de estanterĂaen mi caso particular lo tengo con dos bafles de centro musical y los tira bastante bien6kg input: rca jacks output: banana jacks ac: standard iec jack with fuse protection (2a fuse) color: blackse puede venir a probar a mi casa o lo puedo llevar asi a su domicilio (si esta en cordoba) puede conectar su reproductor de cd, ordenador, o incluso su dispositivo mĂłvil al tubecube | 7, todo lo que necesita es un cable rca y ya está listo para escuchar un sonido excelente valvular
$ 6000
-
Technical specifications dm part 2 sensitivity: 86 db (2,83 v/1 m) iec power handling: > 200 w impedance: 4 ohms frequency response: 40 hz – 23 khz (± 3 db) box principle: bass reflex rear ported crossover: 2 way specification sheet for dm part 1 crossover frequency: hz crossover slope: phase corrected 12 db/octave woofer: 2x 17 cm msp tweeter: 28 mm soft dome weight: 180 kg / 40 lbs dimensions (w x h x d): 204 x 960 x 275 mm 8
-
Overture central: 2 way, 3 driver center channel loudspeaker - 100 watts 8 ohms 2 rear surround: full range driver loudspeaker - 50 watts 4 ohms frequency response: 90hz to 20khz recommended amplifier: 10 to 100w origen: japón impecable estado, en su embalaje originalsurround set – denon modoverture 100 central y traseros juego de bafles surround denon modsonido limpio y definición muy brillante
$ 2500
-
Overture central: 2 way, 3 driver center channel loudspeaker 100 watts 8 ohms 2 rear surround: full range driver loudspeaker 50 watts 4 ohms frequency response: 90hz to 20khz recommended amplifier: 10 to 100w origen: japĂłn impecable estado, en su embalaje originaljuego de bafles sistema surround denon modsonido limpio y definiciĂłn muy brillante
$ 2500
-
6 ohms frequency responseimpecables por donde las mires! tanto funcional como estĂ©ticamente! caracterĂsticas: ype80w music input power38 hz – 20 khz nominal input power20 cm cone woofer x 2 10 cm cone mid-range 23-way 4-speaker bass reflex speaker system speaker unit280w sensitivity254 x 950 x 314 mm90 db/w·m dimensions (wxhxd)5 cm (1”) dome tweeter nominal impedance
$ 14000
-
6 ohms frequency response80w music input power38 hz – 20 khz nominal input power20 cm cone woofer x 2 10 cm cone mid-range 2impecables por donde los mires! tanto estĂ©tica como funcionalmente! caracterĂsticas: ype3-way 4-speaker bass reflex speaker system speaker unit280w sensitivity254 x 950 x 314 mm90 db/w·m dimensions (wxhxd)5 cm (1”) dome tweeter nominal impedance
$ 14000
-
83v@1m) 88db nominal impedance8 ohms frequency response(-10db) 38hz – 20khz -speaker specifications low-frequency transducer6-1/28khz sensitivity(2jbl sp6ii especificaciones generales del jbl sp6ii -seriessoundpoint series -recommended maximum amplifier power80 watts -audio specifications crossover frequencies2
-
Cone type nominal impedance: 8 ohms dimensions (w/h/d) approx0 mhz (50 khz step) antenna fm wire antenna antenna terminals 75 ohm unbalanced intermediate frequency 105 db) signal-to-noise ratio more than 90 db dynamic range more than 90 db tape player section x 2 recording system 4-track 2-channel stereo frequency response 60 – 13,000 hz (-+3 db), (dolby nr off) using a sony type i cassette 60 – 14,000 hz (+-3 db), using a sony type ii cassette wow and flutter ±0sony xcd xb6 lbtxb6 - - incluye control remoto - incluye antena - manual digital > especificaciónes < peak music power output 1400watts specifications peak music power output 1400watts amplifier section din power output (lbt-xb6) 100 + 100 watts (6 ohms at 1 khz, din) continuous rms power output (lbt-xb6) 100 + 100 watts (8 ohms at 1 khz, 10% thd) peak music power output: 1400 watts inputs phono in (phono jacks): sensitivity 3 mv, impedance 47 kilohms video (audio) in (phono jacks): sensitivity 250 mv, impedance 47 kilohms mix mic (phone jack): sensitivity 1 mv, impedance 10 kilohms outputs phones (stereo phone jack) headphones nor included: accepts headphones of 8 ohms or more speaker: accepts impedance of 8 to 16 ohms surround speaker accepts impedance of 16 ohms cd player section x 5 system compact disc and digital audio system laser semiconductor laser (a = 780 nm) emission duration: continuous laser output max7 mhz am tuner section tuning range mw: 531 – 1,602 khz (with the tuning interval set at 9 khz) antena am loop antenna, external antenna terminal intermediate frequency 450 khz speakers ss-xb6av for lbt-xb6 speaker system 4-way, 4-unit, saw, magnetically shielded type speaker units super woofer: 17 cm dia355 × 425 × 435 mm (14 × 16 3/4 × 17 1/4in) inclcone type super tweeter: 2 cm dia5 kg (27 lb 9 oz) supplied accessories *am loop aerial (1) *fm wire aerial (1) *speaker cords285 × 590 × 450 mm (10 1/4 × 23 1/4 × 173/4 in) mass approxcone type tweeter: 6 cm dia6 uf* * this output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperturecone type woofer: 17 cm dia) net per speaker general power requirements 220 – 240 v ac, 50/60 hz power consumption (lbt-xb6) 190 watts dimensions (w/h/d) approxpeak (din) tuner section fm stereo, fm/am superheterodyne tuner fm tuner section tuning range 87projecting parts and controls mass (lbt-xb6) approx
BahĂa Blanca (Buenos Aires)
$ 18000
-
2k ohms sensitivity: -40db general connector: 3earphone driver unit: ø10mm maximum power output: 45mw frequency response: 20hz - 20khz impedance: 16 ohms sensitivity: 112db microphone directivity: omnidirectional frequency response: 50hz-20khz impedance: 25mm stereo connector cable length: 120cm (+/- 10cm) warranty: 1 year
$ 170
-
1w/8o, a-wtd) preamplifier section frequency response ±08o, vol at 0db) frequency response ±08dbw) ihf dynamic power 8ohms 4 ohms 230w 320w total harmonic distortion at rated power (thd + n) 60 input sensitivity and impedance 11 dts dolby 220v 7x120w importador directo, 220v, nuevo en caja cerrada caracteristicas: mplifier section t 787 ftc 200w full disclosure power (all channels driven simultaneously) 7 x 120w (20rated power at 8o, a-wtd) >83db (ref1w/8o, a-wtd) total harmonic distortion + noise (thd + n) 4v tuner section am section tuning range 530khz - khz (120v version, 10khz steps) 531khz - khz (230v version, 9khz steps) usable sensitivity 55dbµv signal/noise ratio 38db total harmonic distortion loop sensitivity 20db s/n 66dbµv fm section tuning range mhz - mhz usable sensitivity mono signal/noise ratio mono stereo 60db 55db total harmonic distortion mono stereo % channel separation 30dbµv rds decode sensitivity 28dbµv general standby power unit dimension (wxhxd) - gross ** (includes feet, knobs and terminals) 435 x 197 x 438mm x x ? net weight 2520hz-20khz) signal/noise ratio >-100db (refsonido paul sintoamplificador nad td 76lb) shipping weight 291khz, 20hz-20khz) signal/noise ratio >93db (ref
-
5db frequency response (headset): 20hz to 20khz frequency response (microphone): 100hz to hz cord length: 182 oz) input impedance: 22 ohms sensitivity (headphone): 122db +/-3db sensitivity (microphone): -44dbv/pa +/- 280 in) width: 145 mm (570 in) depth: 60 mm (2auricular logitech h 151 package contents •headset •user documentation part number pn technical specifications height: 200 mm (7la entrega - envio se realizara dentro de las 24 hs habiles de realizada la compra90 ft) consultar stock antes de realizar la oferta30 in) weight: 80 g (2
$ 470
-
Placas nuevas !!! the main technical parameters: operating voltage range: dc 5-24v (current 3a above, such as to power some advice v / 4a above, best for 24v) audio type: class d output channel: 2 frequency response range: 20hz-20khz snr: 100db dual channel speaker: 4-8 euro maximum output power: 50w (left channel) + 50w (right channel) two channels dual-channel output power: 12v / w(8 euro) / w (4 ohms), 15v / w(8 euro) / w (4 ohms), 19v / w(8 euro) /> w(4 ohms), v /> + 32w(8 euro) /> w(4 ohms)note: the output power and supply voltage, the speaker impedance audio input sizeabout arduio input terminal: please try to use a shielded type of cable to reduce noise and current sound input connector incurredgenerally higher supply voltage, the output power can be supported will be the biggerdifferent impedance speaker can support output power is different, usually smaller horns european power is also easy to do biggerthe connecting cable is available between the lines open or shorted, will lead to noise or current sound, no sound track, etc
-
Equipo amplificador para bajo 220w con octavador, disto y compresor power output 220 watt power handling volts speaker outputs 2 x jack sockets frequency response -3db at 17hz and 30khz high instrument input impedance 39m ohms, input range 150mv - 20mv p-p low instrument input impedance 10k ohms, input range 300mv - 40v p-p line input impedance 10k ohms, input range 300mv - 40v p-p di output 600 ohm balanced / level -20dbu nominal tuner output impedance 22k ohms / level 0dbu nominal impedance minimum 4 ohm signal to noise better than 80db (eq flat) eq bass +/-15db @ 100hz lo mid +/-15db @ 220hz middle +/-15db @ 660hz hi mid +/-15db @ 15 - see more at: http://ashdownmusiccom/products/1/b/18/legacy/119/rm220/#sthash5% thd h x w x d (mm) 78 x 313 x 225 weight (kg) 76khz treble +/-15db @ 7khz shelving deep + effects send impedance 22k ohm / level 0dbu nominal effects return impedance 22k ohm / level 0dbu nominal distortion less than 0
-
Potencia skp max 410 power bridge output: 400 w (rms)/8 ohms power stereo output: 200w+200w (rms)/4 ohms 135w+135w (rms)/8 ohms 400w bridge 8 ohms mono thd (1khz - 8o): frequency response: 10hz–50khz +/- 1,5db crosstalk: >70db (10khz) signal/noise ratio a weighted rms: >85db input impedance active balanced: 20ko balanced & 10ko un-balanced damping factor f=1khz - 8o: >150 slew rate: 20v/us power supply: v ac - hz dimension (wxdxh): 19”x81/4”xx210x88mm) net weight: 8,6 k
$ 3500
-
Caracteristicas: ftc 2 x 80w full disclosure power (all channels driven simultaneously) 7 x 40w ihf dynamic power 8 ohms 4 ohms 2 x 110w 2 x 160w total harmonic distortion at rated power 60 input sensitivity and impedance 250mv/47kohms frequency response ±01khz, 20hz-20khz) signal/noise ratio >100db (refrated power at 8 ohms, a-wtd) >90db (ref4 3d dolby dts 220v importador directo, nuevo en caja cerrada1w at 8ohms, a-wtd) tuner section am section tuning range 520khz - khz (120v version, 10khz steps) 522khz - khz (230v version, 9khz steps) usable sensitivity 60dbµv signal/noise ratio 40db total harmonic distortion loop sensitivity 20db s/n 60dbµv fm section tuning range mhz - mhz usable sensitivity mono signal/noise ratio mono stereo 65db 60db total harmonic distortion mono stereo % channel separation 30db rds decode sensitivity 28dbµv general idle power 50w standby power unit dimensions (wxhxd) - gross (includes feet, knobs and terminals) 435 x 167 x 397mm x 6 5/8 x ? net weight 11sonido paul sintoamplificador nad t hdmi 13lb) shipping weight 14
-
Oportunidad! descripciĂłn 8 ohms per channel 270w rms 4 ohms per channel 450w rms 2 ohms channel 550w rms frequency response: 20hz to 20khz total harmonic distortion: 05 pulgadas peso: 1516v signal to noise ratio: 104db speaker load impedance: 4 ohm (minimum) dimensiones: 19 x 5potencia made in usa excelente estado 900w: modo bridge y estereo, limiter, lowfilter1% damping factor: 200 gain: 32 db input sensitivity: 1
$ 8200
-
Oportunidad! descripción: 8 ohms per channel 270w rms 4 ohms per channel 450w rms 2 ohms channel 550w rms frequency response: 20hz to 20khz total harmonic distortion: 05 pulgadas peso: 1516v signal to noise ratio: 104db speaker load impedance: 4 ohm (minimum) dimensiones: 19 x 5consola allen and heath 16 mix wizard made in england excelente consola profesional con anvil (+ opcional potencia qsc usa 900) *última foto mayores detalles 16 mic/line inputs with balanced xlr/trs jack, and direct output 100mm faders – throughout 4-band eq – comprehensive equalisation with 2 sweepable mids 6 auxiliary sends – 2 pre, 2 switched, 2 post fade (may be reconfigured) 2 stereo returns – on trs jack dedicated mono output fader with innovative mode for control of aux fed subs independent a-b output to feed any number of applications, including a 2-track recorder, monitor foldback or speaker fills metering – twin 3-colour, 12 segment bargraphs follow selected monitor source, channel signal and peak leds onboard fx – 16 fx programs with external editing software connected via midi pluggable jumpers for user configurability mounting – desk or rack mountable, with rotating connector pod sys-link 2 output option – for connection to other allen & heath sys-link compatible consoles * opcional potencia made in usa excelente estado 900w: modo bridge y estereo, limiter, lowfilter1% damping factor: 200 gain: 32 db input sensitivity: 1
$ 22000
-
Consola allen and heath 16 mix wizard made in england excelente consola profesional con anvil *última foto mayores detalles 16 mic/line inputs with balanced xlr/trs jack, and direct output 100mm faders – throughout 4-band eq – comprehensive equalisation with 2 sweepable mids 6 auxiliary sends – 2 pre, 2 switched, 2 post fade (may be reconfigured) 2 stereo returns – on trs jack dedicated mono output fader with innovative mode for control of aux fed subs independent a-b output to feed any number of applications, including a 2-track recorder, monitor foldback or speaker fills metering – twin 3-colour, 12 segment bargraphs follow selected monitor source, channel signal and peak leds onboard fx – 16 fx programs with external editing software connected via midi pluggable jumpers for user configurability mounting – desk or rack mountable, with rotating connector pod sys-link 2 output option – for connection to other allen & heath sys-link compatible consoles oportunidad! descripción: 8 ohms per channel 270w rms 4 ohms per channel 450w rms 2 ohms channel 550w rms frequency response: 20hz to 20khz total harmonic distortion: 05 pulgadas peso: 1516v signal to noise ratio: 104db speaker load impedance: 4 ohm (minimum) dimensiones: 19 x 51% damping factor: 200 gain: 32 db input sensitivity: 1
-
Specifications general maximum recommended amplifier power 150w power handling (continuous/peak) 75w/300w nominal impedance 8 ohms sensitivity (2the dual 5" woofers provide clean, natural dialogue reproduction, and the ultrahigh-frequency driver extends response out to 40khz, making the es25c perfect for today's high-definition recordings and broadcasts83v/1m) 90db frequency response (±3db) 80hz - 40khz crossover frequencies hz - 24db/octave hz - 18db/octave straight-line signal path (ssp) ultrahigh-frequency driver mm) polyester-film ring radiator mounted in jbl eos waveguide, shielded high-frequency transducer mm) titanium-laminate dome in eos waveguide, shielded low-frequency transducer dual mm) polyplas, shielded magnetically shielded yes terminals gold-plated, 5-way binding posts dimensions (h x w x d) 7" x " x mm x 476mm x 254mm) weight per speaker 16the tweeter is mounted in our proprietary elliptical oblate spheroidal (eos) waveguide for improved high-frequency dispersion anywhere in the listening roombafle central jbl es-25c compatibles con amp de 150 w rms garantĂa oficial por 12 meses nuevo en caja cerrada center channel speakers jbl es series es25c 3-way, dual mm) center channel speaker the video-shielded es25c center channel speaker delivers accurate performance with dramatically reduced distortion for incredibly realistic sound thanks to its polyplas woofers and titanium-laminate tweeter
$ 6300
-
Amplificador estereo integrado vincent k-v nuevo en caja cerrada caracterĂsticas vincent audio’s designs have been appearing on “best of the year” lists with increasing frequencyfeatures: vacuum tube integrated amplifier automatic tube biasing preamplifier stage tubes: 12ax7 1x, 2x 12au7 amplifier stage tubes: 4 x el34 connections: 4 inputs and 1 x record out system remote control specifications: rated power 8 ohms: 2 x 35w frequency response: 20 hz-40 khz (+ /-1 db) distortion: 80 db speaker impedance: 8 ohm / 4 ohm power consumption: 250w dimensions: 17Âż wide, 8Âż high, 15but vincent realizes that many discriminating audiophiles still desire classic construction techniques and aren’t looking for a tiny box to place next their pcfive of its designs were honored with a listing in the absolute sound high-end audio buyer’s guide, including three stereo amplifiersfidelity is taking a back seat to ultra-compact size and microchip circuitrythese days too many components from other manufacturers are succumbing to the miniaturization crazetoo new on these shores for inclusion is the k-35 vacuum tube integrated amplifier, but we expect it will soon be reaping the honors, too2Âż deep weight: 58
-
Amplificador estereo integrado vincent k-v nuevo en caja cerrada caracterĂsticas vincent audio’s designs have been appearing on “best of the year” lists with increasing frequencyfeatures: vacuum tube integrated amplifier automatic tube biasing preamplifier stage tubes: 12ax7 1x, 2x 12au7 amplifier stage tubes: 4 x el34 connections: 4 inputs and 1 x record out system remote control specifications: rated power 8 ohms: 2 x 35w frequency response: 20 hz-40 khz (+ /-1 db) distortion: input sensitivity: 200mv input impedance: 47kohm signal to noise ratio:> 80 db speaker impedance: 8 ohm / 4 ohm power consumption: 250w dimensions: 17Âż wide, 8Âż high, 15but vincent realizes that many discriminating audiophiles still desire classic construction techniques and aren’t looking for a tiny box to place next their pcfive of its designs were honored with a listing in the absolute sound high-end audio buyer’s guide, including three stereo amplifiersfidelity is taking a back seat to ultra-compact size and microchip circuitrythese days too many components from other manufacturers are succumbing to the miniaturization crazetoo new on these shores for inclusion is the k-35 vacuum tube integrated amplifier, but we expect it will soon be reaping the honors, too2Âż deep weight: 58
-
83v @ 1m): 91db • frequency response (–3db): 75hz – 20khz • crossover frequency(ies): 800hz, hz • 1" pure-titanium dome with eos™ waveguide • 4" polyplas™ cone • dual 5-1/4" polyplas™ cones • dimensions(h x w x d): 7-7/8" x " x 9" • weight: 15 lb (6central jbl studio series ii frente desmontable - doble bass reflex trasero estado impecable no hago envios al interior • impedance: 8 ohms • sensitivity (2
$ 4500
-
83v/m nominal impedance: four ohms minimum impedance: 35 ohms (at 200hz) nominal/peak power handling: w crossover frequencies: 450hz, 25 way bass reflex floorstanding loudspeaker tweeter: 1x jet 5 amt woofers: 2x 150mm as-xr cone frequency response: 30hz-50khz sensitivity: 88db/25khz dimensions (wxhxd): 26xx314kg finishes: black gloss, white gloss, walnut gloss, tobacco gloss price: ÂŁ per pairbafles elac fs407 igual a nuevos ! technical specifications type: 2
-
7% thd, for europe) 160 w + 160 w high dynamic power/channel ( ohms) w damping factor 250 frequency response 5 hz-100 khz (+0 db/-3 db) riaa equalization deviation 20 hz-20 khz +/-0yamaha a-s amplificador estereo integrado 2x160wt, 220v, importador directo caracterĂsticas amplificador integrado • alta potencia de salida de 160 w Ă— 2 (máx5 db total harmonic distortion (cd to sp out, 20 hz-20 khz) %), 150 w Ă— 2 (rms) • diseño simĂ©trico para una reproducciĂłn estĂ©reo ideal • transmisiĂłn de señal equilibrada de fase completa • amplificador de potencia flotante y equilibrado con mosfet • diseño de baja impedancia exhaustivo (fijaciĂłn segura mediante tornillos/cables gruesos) • transformador ei personalizado instalado con arandelas de latĂłn • terminales de entrada xlr equilibrados • amplificaciĂłn fonográfica con configuraciĂłn independiente • dimensiones (ancho Ă— alto Ă— largo): mm • peso: 23,4 kg *especificaciones tĂ©cnicasreceiver / integrated amplifier maximum power (4 ohms, 1khz, 0
-
83 mv/ 1 m impedance: 6 ohms dimensions (w x h x d): 300 x 72 x 113 mm weight: 083 mv/ 1 m impedance: 6 ohms dimensions (w x h x d): 105 x 151 x 113 mm weight: 0juego de parlantes home theater yamaha ns-p270 (no incluye subwoofer) excelente estado specifications as taken from the manufacturer's website: yamaha ns-p270 speakers: system frequency response 30 hz-25 khz satellite speakers (4) type: 2-way acoustic suspension nominal input power: 30 w sensitivity: 85 db/29 kg incluye sus cables (no incluye subwoofer) no dudes en hacer tu consulta!8 kg center speaker (1) nominal input power: 30 w sensitivity: 85 db/2
-
5mv (mm), 150mv (line) signal to noise ratio: 75db (mm), 80db (line) channel separation: 35db (line) output: 150mv (line) speaker load impedance: 4 ohms to 16 ohms semiconductors: 16 x ic, 4 x fet, 56 x transistors, 69 x diodes, 18 x led dimensions: 250 x 71 x 316mm weight: 3increible la calidad y potencia tuning range: fm, mw power output: 20 watts per channel into (stereo) frequency response: 20hz to 20khz total harmonic distortion: 1% damping factor: 20 input sensitivity: 2
$ 4500
-
8 lbs cabinet 100 watts power handling @ 8 ohms 2 x 10" lf drivers frequency response: 57 hz – 5 khz sensitivity: 100 db spl @ 1w/1m dimensions (h x w x d inches): 24 x 13 x 11 handling weight: 33vendo amplificador micro-cl stack 100w (cabezal + caja 2x10) head power output: 100 watts @ 8 ohms preamp: solid-state power amp: solid-state tone controls: bass, mid, treble unbalanced line out fx loop dual inputs (0db & -15db) 1/8" headphone out / line in dimensions (h x w x d inches): 7 x 122 x 10 handling weight: 13
$ 10000