Usable sensitivity 60dbv signal
Listado usable sensitivity 60dbv signal
-
1w/8o, a-wtd) total harmonic distortion + noise (thd + n) 4v tuner section am section tuning range 530khz - khz (120v version, 10khz steps) 531khz - khz (230v version, 9khz steps) usable sensitivity 55dbµv signal/noise ratio 38db total harmonic distortion loop sensitivity 20db s/n 66dbµv fm section tuning range mhz - mhz usable sensitivity mono signal/noise ratio mono stereo 60db 55db total harmonic distortion mono stereo % channel separation 30dbµv rds decode sensitivity 28dbµv general standby power unit dimension (wxhxd) - gross ** (includes feet, knobs and terminals) 435 x 197 x 438mm x x ? net weight 258dbw) ihf dynamic power 8ohms 4 ohms 230w 320w total harmonic distortion at rated power (thd + n) 60 input sensitivity and impedance 1rated power at 8o, a-wtd) >83db (ref20hz-20khz) signal/noise ratio >-100db (ref6lb) shipping weight 291khz, 20hz-20khz) signal/noise ratio >93db (ref1 dts dolby 220v 7x120w importador directo, 220v, nuevo en caja cerrada caracteristicas: mplifier section t 787 ftc 200w full disclosure power (all channels driven simultaneously) 7 x 120w (20sonido paul sintoamplificador nad td 71w/8o, a-wtd) preamplifier section frequency response ±08o, vol at 0db) frequency response ±0
-
1w at 8ohms, a-wtd) tuner section am section tuning range 520khz - khz (120v version, 10khz steps) 522khz - khz (230v version, 9khz steps) usable sensitivity 60dbµv signal/noise ratio 40db total harmonic distortion loop sensitivity 20db s/n 60dbµv fm section tuning range mhz - mhz usable sensitivity mono signal/noise ratio mono stereo 65db 60db total harmonic distortion mono stereo % channel separation 30db rds decode sensitivity 28dbµv general idle power 50w standby power unit dimensions (wxhxd) - gross (includes feet, knobs and terminals) 435 x 167 x 397mm x 6 5/8 x ? net weight 11caracteristicas: ftc 2 x 80w full disclosure power (all channels driven simultaneously) 7 x 40w ihf dynamic power 8 ohms 4 ohms 2 x 110w 2 x 160w total harmonic distortion at rated power 60 input sensitivity and impedance 250mv/47kohms frequency response ±04 3d dolby dts 220v importador directo, nuevo en caja cerradarated power at 8 ohms, a-wtd) >90db (refsonido paul sintoamplificador nad t hdmi 11khz, 20hz-20khz) signal/noise ratio >100db (ref3lb) shipping weight 14
-
03% damping factor: 50 input sensitivity: 1v signal to noise ratio: 105db speaker load impedance: 8Âż to 16Âż dimensions: 297 x 49 x 262mm weight: 3equipo technics made in japan de los 80 original micro series amplificador se-c01 preamplificador su-c01 sitoamplificador st-c01 original funcionando buen estado 110 volts power output: 50 watts per channel into 8Âż (stereo) frequency response: 1hz to 100khz total harmonic distortion: 0
-
03% • damping factor: 500 • input sensitivity: 1v • signal to noise ratio: 116db • speaker load impedance: 4¿ (minimum) • dimensions: 440 x 92 x 334mm • weight: 7fotos reales zona posible de entrega: saavedra / nuñez (c) incluye cables cambridge audio de alta performance especificaciones • power output: 70 watts per channel into 8¿ (stereo), 180w into 8¿ (mono) • frequency response: 10hz to 100khz • total harmonic distortion: 0sonido claro y realexcelente equipo en construcción y materialesexcelente construcción y materialesestado impecablecontroles bass y treble
-
03% damping factor: 70 input sensitivity: 1v signal to noise ratio: 115db speaker load impedance: 8Âż (minimum) dimensions: 460 x 160 x 375mm weight: 18acepto mercado pago y audio3kg year: original y sin reparacionessansui ba- power output: 110 watts per channel into 8Âż (stereo) frequency response: 5hz to 100khz total harmonic distortion: 0
-
Twice signal (4th mini album) cd + booklet + postales version aleatoria en stock sale en el dia por mercado envios podes retirar en el dia por nuestro local de microcentro tracklist: signal * three times a day (¿¿¿ ¿¿) only you (¿) hold me tight eye eye eyes someone like me
-
![Cd: Twice - [signal] 4th Mini Album C Ver. Cd Photobook](https://img.ar.class.posot.com/es_ar/2018/02/04/Cd-Twice-signal-4th-Mini-Album-C-Ver-Cd-Photobook-20180204025038.jpg)
El producto que usted recibira es importado, original nuevo, sellado y fisicosi lo necesita urgente, no realice la compraantes de comprar pregunte si hay stocktitulo: cd: twice - [signal] 4th mini album c verel producto demora entre 6 y 10 dĂas hábiles en llegar a nuestro depositonuestros productos proceden solo de distribuidoras y tiendas oficialescd photobook -formato: audio cd -sello: genie music -discos: 1 -fecha de lanzamiento: -upc
-
Titulo: cd: twice - signal (4th mini album) (asia - import) -artista: twice -formato: audio cd -sello: imports -detalle: import -discos: 1 -fecha de lanzamiento: -upcel producto que usted recibira es importado, original nuevo, sellado y fisicosi lo necesita urgente, no realice la compraantes de comprar pregunte si hay stockel producto demora entre 6 y 10 dĂas hábiles en llegar a nuestro depositonuestros productos proceden solo de distribuidoras y tiendas oficiales
-
Campera signal campera de ski y snowfirewall gr insulationresistente al agua10k / 10k impermeabilizaciĂłn y transpirabilidad
-
Introduction to signal processingse puede entregar sin cargo en zona norte y capital federal, a convenir por ambas partescualquier consulta, mandar mensajemuy buen estadoeditorial prentice hall
$ 900
-
Tabla: signal john jackson sierra temporadas, con reparaciones) - $ fijaciones: burtom custom se adapta a cualquier tipo de tabla (1 dia de uso, tengo caja) - $ botas: burton moto talle 43 (2 temporadas) $ dc tabla y fijaciones $
$ 6700
-
Army military survey signal lamp - colecciĂłn envĂos a todo el paĂsluces supervivencia vietnan - u
Mar del Plata (Buenos Aires)
$ 4999
-
Led – hi/lo mode with drive channel increased sensitivity on indicatorgain – channel sensitivity adjustment overall controls blend – signal level balance adjustment between channels clean and drive master volume – bc-1’s overall output level adjustmentconnections right panel input – instrument input of the preamp send fx – signal send to aux effect return fx – aux effect signal return left panel output – direct output to power ampcontrols clean level – output signal level adjustment high – high frequencies adjustment mid – middle frequencies adjustment low – low frequencies adjustment gain – channel sensitivity adjustment drive level – output signal level adjustment high – high frequencies adjustment mid – middle frequencies adjustment by means of rejecter filter freqfootswitch drive – drive channel on/off led – drive channel on indicator footswitch hi/lo – drive channel increased sensitivity on/offctrl out – amt ts-2midi aux convertors control output cabdrive channel contains a number of over amplification stages and is intended for obtaining the modern sound from clean to totally overdriven oneclean channel shapes the classic bass guitar sound characteristic for «old» amplifiers and allows both velvet transparent sound and slight compressed overdrive depending on the position of gain controlamt bc-1 “bass crunch” – 2-channel jfet bass guitar preamp features overview we are happy to present one of the most versatile bass guitar preamps on the market in a such small package – amt electronics bc-1 “bass crunch”! the preamp has been built on the basis of the custom technology by ¿¿¿ using jfet emulation of the vacuum tube range clippingnotch – cutout frequencies switch (rejecter filter) 500hz, 330hz, 230hzdi out – balanced output intended for connection of devices equipped with balanced inputsthe wide adjustment range in combination with rich functional possibilities that can only be found in a stomp box have considerably increased the preamp versatility– direct output to mixer’s line input«bass crunch» bc-1 preamp is based on a two-channel circuitthe adjustable 3-position mid-range filter combined with deep adjustments along the frequency ranges offer a musician its rich possibilities related to shaping of the overdriven tone rangepower dc 18v – for connection of power adapter battery compartment – for two 9v batteries installationlow – low frequencies adjustment prethe high mode provides additional possibilities in terms of the range enrichment towards higher sound density and aggressivenessnotch – rejecter filter switch before drive stage
-
The tube can be pre-heated by switching on a digital signal source while a different line input is workingthe signal is fed directly to the blue alps-pot via the input selector and then sent through the active electronics, thus the integrated should be seen as a combination of a high sensitivity stereo power amplifier with passive preamplifierthe quiescent current of the output-stage is switched off and the signal is muted through the dedicated switch on the frontpanelin addition to that, there is a buffer stage for the tape recording output which carries always the signal of the choosen inputbuilt just for music in the most uncomprimising way: it has only the volume control and an input selector in the signal chainthe two digital inputs are switched electronically: when a signal reaches dig 1, the output-tube is heated independently from the input chosen, ibrinkmann integrated specifications output power 8 ohm 75w output power 4 ohm 120w damping factor 8 ohm 65% thd 0,01% line inputs 4 digital inputs 2 input impedance line 20kohm input sensitivity line 400mv input impedance digital 75ohm input sensitivity digital 0,5vss samplingrates khz wordlength 18bit width 440mm height 80mm depth 370mmthe headphone-output-socket is located on the frontpanel and the relative circuit has been optimised for headphones with an impedance of at least 200 ohmsa typical small amount of dc is nulled out by a dc-servo-regulatorsonido paul amplificador integrado 120 w brinkmann integrated 220vwhen connected to the mains, the amplifier is automatically set to 'stand-by' as there is no power-on-switchcaracterĂsticas one of the purest amplifiers in the high-end audio world is our integratedthe digital signals of cd-players, dat-recorders or digital tuners may have sample-frequencies from 32 to 48 khz, the dac-module is automatically adjusting itself to the input frequencyfurthermore there is a dedicated headphone amplifier which is activated when the integrated is in stand-bythere are four line and two digital inputs, the latter drive the optional dac-moduleto make the amplifier become a truly digital device, there is the optional dac-module to be used: its current-to-voltage stage is built using a miniaturised tube for best sonic resultsit is important not to load the inputs with dc, as all stages of the amplifier are dc- coupled
-
16v signal to noise ratio: 104db speaker load impedance: 4 ohm (minimum) dimensiones: 19 x 5consola allen and heath 16 mix wizard made in england excelente consola profesional con anvil (+ opcional potencia qsc usa 900) *última foto mayores detalles 16 mic/line inputs with balanced xlr/trs jack, and direct output 100mm faders – throughout 4-band eq – comprehensive equalisation with 2 sweepable mids 6 auxiliary sends – 2 pre, 2 switched, 2 post fade (may be reconfigured) 2 stereo returns – on trs jack dedicated mono output fader with innovative mode for control of aux fed subs independent a-b output to feed any number of applications, including a 2-track recorder, monitor foldback or speaker fills metering – twin 3-colour, 12 segment bargraphs follow selected monitor source, channel signal and peak leds onboard fx – 16 fx programs with external editing software connected via midi pluggable jumpers for user configurability mounting – desk or rack mountable, with rotating connector pod sys-link 2 output option – for connection to other allen & heath sys-link compatible consoles * opcional potencia made in usa excelente estado 900w: modo bridge y estereo, limiter, lowfilter5 pulgadas peso: 151% damping factor: 200 gain: 32 db input sensitivity: 1oportunidad! descripción: 8 ohms per channel 270w rms 4 ohms per channel 450w rms 2 ohms channel 550w rms frequency response: 20hz to 20khz total harmonic distortion: 0
$ 22000
-
16v signal to noise ratio: 104db speaker load impedance: 4 ohm (minimum) dimensiones: 19 x 5consola allen and heath 16 mix wizard made in england excelente consola profesional con anvil *última foto mayores detalles 16 mic/line inputs with balanced xlr/trs jack, and direct output 100mm faders – throughout 4-band eq – comprehensive equalisation with 2 sweepable mids 6 auxiliary sends – 2 pre, 2 switched, 2 post fade (may be reconfigured) 2 stereo returns – on trs jack dedicated mono output fader with innovative mode for control of aux fed subs independent a-b output to feed any number of applications, including a 2-track recorder, monitor foldback or speaker fills metering – twin 3-colour, 12 segment bargraphs follow selected monitor source, channel signal and peak leds onboard fx – 16 fx programs with external editing software connected via midi pluggable jumpers for user configurability mounting – desk or rack mountable, with rotating connector pod sys-link 2 output option – for connection to other allen & heath sys-link compatible consoles oportunidad! descripción: 8 ohms per channel 270w rms 4 ohms per channel 450w rms 2 ohms channel 550w rms frequency response: 20hz to 20khz total harmonic distortion: 01% damping factor: 200 gain: 32 db input sensitivity: 15 pulgadas peso: 15
-
5” magnet weight (each): 80 oz rms power handling: 200-watts frequency response (-3db): 50hz-3khz usable low frequency (-10db): 33hz nominal impedance: 8-ohms sensitivity: 98db maximum spl: 123db dimensions (w x h x d inches): 24 x 22 x 16 weight: 72 poundslf drivers: 1 x 15” cast voice coil: 2
-
9 db / 1 w 1 m usable freqrange: 40 hz ~ 2 khz cone: kevlar® impregnated cellulose voice coil diameter: 4impedance: 8 ohms power capacity: w peak 700 w program 350 w continuous sensitivity: 97
-
9 db / 1 w 1 m usable freqrange: 40 hz ~ 2 khz cone: kevlar® impregnated cellulose voice coil diameter: mm voice coil material: aluminum ribbon wire polyimide-impregnated fiberglass former nomex® stiffener solderless diffusion welded ofhc copper leads net weight 9kg precio x cada unoimpedance: 8 ohms power capacity: w peak 700 w program 350 w continuous sensitivity: 97
$ 4500
-
4 db / 1 w 1 m usable freqmpedance: 8 ohms power capacity: 800 w peak 400 w program 200 w continuous sensitivity: 96range: 40 hz ~ 3 khz cone: kevlar® impregnated cellulose voice coil diameter: 2
-
Input control signal voltage: (0-2input: dc+: connect power positive vcc(power supply according to relay voltage) dc-: connect power negative gnd ch1: signal trigger end of relay module contact 1 (high level trigger) ch2: signal trigger end of relay module contact 2 (high level trigger) ch3: signal trigger end of relay module contact 3 (high level trigger) ch4: signal trigger end of relay module contact 4 (high level trigger) ch5: signal trigger end of relay module contact 5 (high level trigger) ch6: signal trigger end of relay module contact 6 (high level trigger) ch7: signal trigger end of relay module contact 7 (high level trigger) ch8: signal trigger end of relay module contact 8 (high level trigger) 2the trigger is usually realized by connecting power negative end to the signal trigger endthe trigger is usually realized by connecting power positive end to the signal trigger endmeaning of high level and low level: high level trigger refers to a forward voltage between the signal trigger end (ch) and the power negative polelow level trigger refers to a 0v between the signal trigger end and the power negative pole, or the voltage of the trigger end is lower than that of the power positive pole, which reaches the level of trigger point, the relay is closedmodule interface: 18ma 3-5v 2ma contact3 5v 0ma 37ma 3-5v 2ma contact4 5v 0ma 48ma 3-5v 2ma contact5 5v 0ma 59ma 3-5v 2ma contact6 5v 0ma 70ma 3-5v 2ma contact7 5v 0ma 81ma 3-5v 2ma contact8 5v 0ma 90ma 3-5v 2ma three5v, low level status, relay off) (3-5v, high level status, relay on) 48ma 3-5v 2ma contact2 5v 0ma 26more convenient to use kf301 port for control line connectingwhen the trigger end has positive voltage or voltage reaches the trigger point, relay is closedelectricalparameters: voltagequiescentcurrentworkingcurrenttriggervoltagetriggercurrent contact1 5v 0ma 13product introduction: one: 1input power supply: 5v dc (160ma) 3product instruction: power supply of module: power supply must be dc, voltage should match the relay voltageomron 5v solid-state relay, 240v/2a, fuse with resistance 240v/2a
-
5mv (mm), 200mv (line) signal to noise ratio: 75db (mm), 82db (line) output: 150mv (line) video connections: composite dimensions: 430 x 157 x 355mm weight: 11kg vendo, no permuto, sinto sony sin control remoto, (se consigue aca por menos de 200) incluye con trafo de wel equipo se encuentra en excelentes condicionessinto amplificador sony str de-705se entrega con cuatro bafles jbl con un sonido muy claro y nĂtido (se incluyen los soportes)specifications: tuning range: fm, mw power output: 120 watts per channel into 8Âż (stereo) surround output: 120w (front), 120w (center), 50w (rear) frequency response: 10hz to 50khz total harmonic distortion: 0opcional sub woofer polk audio psw 110, no incluido en esta publicaciĂłnimpecable estado!3% input sensitivity: 2
$ 6500
-
5mv (mm), 150mv (line) signal to noise ratio: 60db (mc), 73db (mm), 86db (line) channel separation: 60db (line) output: 150mv (line) speaker load impedance: 4Âż to 16Âż dimensions: 430 x 142 x 255mm weight: 7amplificador technics su specificationspower output: 47 watts per channel into 8Âż (stereo) frequency response: 20hz to 20khz total harmonic distortion: 002% damping factor: 36 input sensitivity: 0
$ 8500
-
Ecualizador grafico teac ge 20 made in japan input sensitivity: 300mv output level: 300mv frequency response: 20hz to 30khz signal to noise ratio: 82db total harmonic distortion: 003% control range: ± 12db frequency bands: k, 2k, 4k, 8k, 16khz dimensions: 440 x 95 x 170mm weight: 45kg capital federal, zona de villa urquiza
$ 10000
-
Specifications general maximum recommended amplifier power 150w power handling (continuous/peak) 75w/300w nominal impedance 8 ohms sensitivity (283v/1m) 90db frequency response (±3db) 80hz - 40khz crossover frequencies hz - 24db/octave hz - 18db/octave straight-line signal path (ssp) ultrahigh-frequency driver mm) polyester-film ring radiator mounted in jbl eos waveguide, shielded high-frequency transducer mm) titanium-laminate dome in eos waveguide, shielded low-frequency transducer dual mm) polyplas, shielded magnetically shielded yes terminals gold-plated, 5-way binding posts dimensions (h x w x d) 7" x " x mm x 476mm x 254mm) weight per speaker 16the dual 5" woofers provide clean, natural dialogue reproduction, and the ultrahigh-frequency driver extends response out to 40khz, making the es25c perfect for today's high-definition recordings and broadcastsbafle central jbl es-25c compatibles con amp de 150 w rms garantĂa oficial por 12 meses nuevo en caja cerrada center channel speakers jbl es series es25c 3-way, dual mm) center channel speaker the video-shielded es25c center channel speaker delivers accurate performance with dramatically reduced distortion for incredibly realistic sound thanks to its polyplas woofers and titanium-laminate tweeterthe tweeter is mounted in our proprietary elliptical oblate spheroidal (eos) waveguide for improved high-frequency dispersion anywhere in the listening room
$ 6300
-
Specifications input sensitivity: 150mv output level: 150mv frequency response: 20hz to 20khz signal to noise ratio: 70db total harmonic distortion: 07-band equalizer for sources05% channel separation: 50db control range: ± 12db frequency bands: k, 2dual 5-band equalizers for mikes/instruments3k, 16khz dimensions: 430 x 78 x 223mm weight: 2electronic bbd reverb with pulsating the rg-707 is a versatile equalizer and mixer for instrumentalists and budding recording engineers
$ 2500
-
Ecualizador grafico teac ge 20 input sensitivity: 300mv output level: 300mv frequency response: 20hz to 30khz signal to noise ratio: 82db total harmonic distortion: 003% control range: ± 12db frequency bands: k, 2k, 4k, 8k, 16khz dimensions: 440 x 95 x 170mm weight: 4
$ 10000
-
5mv (mm), 250mv (line) signal to noise ratio: 72db (mm), 82db (line) output: 250mv (line) video connections: composite dimensions: 430 x 135 x 300mm weight: 6sintoamplificador sony srt-d - stereo- 70 mas 70 watts super potente impecable estado y muy poco uso con control remoto original atencion specifications tuning range: fm, mw power output: 70 watts per channel rms into 8 ohms (stereo) surround output: 40w (front), 40w (center), 20w (rear) frequency response: 10hz to 50khz total harmonic distortion: 02kg accessories: remote control - manual - solo efectivo9% input sensitivity: 2
$ 5500
-
3 pulgadas (174 x 118 x 33 mm) caracterĂsticas inalámbricas frequency ghz signal rate 1n: hasta 150mbps(dinámica) 11g: hasta 54mbps(dinámica) 11b: hasta 11mbps(dinámica) reception sensitivity 130m: -68dbm@10% per 108m: -68dbm@10% per 54m: -68dbm@10% per 11m: -85dbm@8% per 6m: -88dbm@10% per 1m: -90dbm@8% per transmit power ce6a estándares inalámbricos ieee n*, ieee g, ieee b dimensiones (w x d x h) 6router wifi tp link wr740n wireless 150mbps norma n caracterĂsticas de hardware interfaz 4 puertos lan mbps 1 puerto lan mbps botĂłn botĂłn de wps/reset botĂłn de encendido/apagado antena antena omnidireccional de 5dbi (rp-sma) fuente de alimentaciĂłn externa 5vdc/0
$ 200
